November 2013. Harley Davidson presents an unusual bike for the standards that people are used to, the Harley Davidson Street. This bike has a new liquid cooled engine, with volume of 500 cc or 750 cc.
After several months of waiting are finally available in Italy and us of Free Spirits, with the help of Motorcycle Storehouse, we set the work to study all new line of accessories.
At the first look this bike may be a bit rough, but after some time has given us great satisfaction and a lot of surprises.
And here our list of code that we mount on this bike:
201214: Fork kit for Harley Davidson Street. Made to improve confidence at higher speeds and when cornering, this new fork and lowering kit replaces the original “damper tube” and, like previous hydraulic valve kit, this new upgraded version considerably improves the original forks which have almost no hydraulic damping. In addition, black anodized fork caps with filler cap, perfectly interchangeable with the originals. Easily mounted in the stem through a special socket wrench scratch-resistant 32 mm (included with the first kit purchased). This new valve kit increases front stability and braking characteristics by giving perfect control of deceleration even under the hardest braking. It will also increase mechanical grip entering and exiting a curve thanks to the immediate hydraulic control. Original oil can be used. Even quicker and easier to mount than the previous kit, this doesn’t require any modification and is therefore completely reversible. Supplied complete with everything needed for installation. For this kit spare parts are available.
201400: Tweek bar to clamp around fork slider to preventing unwanted flexing due to the long and slim fork tube.
201905: This kit for Harley Davidson Street was created to purely aesthetic, can replace the unsightly factory bolts. Bushings alloy billet and anodized Black, galvanized steel bolts.
202604: Bracelets lightweight and machined from solid to ensure the maximum resistance, with collar of 37 mm to set directly on the original fork. Tube 22 mm, removable in seconds, with an angle of 8 degrees.
202611: This kit, made in lightweight CNC machined billet aluminium for Harley Davidson Street, replaces top and bottom triple clamps. Increased rigidity and control. Kit ready for replacement, including shaft, support OEM lighthouse and ignition switch.
203501: Kit with 4 piston Brembo calipers and mounting bracket (Available anodized black). Work with original master cylinder. The kit include the brake pads. Increases braking power and modulation.
204035: Performance air filter designed for the Harley Davidson Street. The 65 mm diameter tubular stainless steel elbow is produced by a unique patented process that allows the use of thin walled lightweight (only 305 gr) construction. The kit includes a well proven Sprint Filter ‘Cone’ air filter, black finished tubular elbow manifold, Crankcase breather pipes and required fittings.
Sprint Filter is the only patented water repellent filter that will prevent liquid substances from passing through, allowing it to be used in bad weather conditions. The new P08 WP is a new concept air filter and was born in racing, presently used in World Championships Moto GP Moto 3, Superbike, Supersport and Superstock. Other filter materials tend to break (cotton) or with severe pressure falls (sponge). There isn't another filter in the World built with this patented technology.
P08 WP filter is practically free maintenance. Cleanable just by compressed air from the motor side out and re-insert it in the airbox. does not need washing or oil treatments to retain dust. If maintained in the correct way, will last for the entire life of the bike and will no longer be necessary to replace it. For more tech info see enclosed file and this: www.sprintfilter.net
205501: Kit with 4 piston Brembo calipers and mounting bracket (Available anodized black). Increases braking power and modulation.
206301: Billet aluminium anodized forward controls. 13 mm master cylinder, folding foot rests.
207726: This pulley cover fits using the pulley locking bolt and covers the stock pulley. Anodised in black with stainless steel allen bolt deatiling this certainly looks 100% better. Ideal in combination with code 207728.
207729: This kit was created to purely aesthetic, can replace the unsightly factory axles.
208848: Exact copy of the original fairing, manufacture from extremely light fiberglass ready to finish.
208919: Complete relocation kit that include: bracket, license plate holder, two brackets for indicators and a new led tail light. As optional is available the fiberglass rear fender with code 208848.
209020: This product is designed to re-position your key ignition to the left side of the frame.
209021: Kit designed specifically to relocate the horn.
209814: Lightweight CNC machined billet aluminium designed to attach to front forks for Harley Davidson Street. For aftermarket turn signal with M8 thread. Fit all 37 mm diameter fork. Two piece clamps can be fitted without removing triple trees! Available anodized black only.
And below, in collaboration with Motorcycle Storehouse, some aftermarket items installed on our street.
974670: Ps 'Model 444' shocks heavy duty, black 13"
589993: RSD Diesel wheel 6X17 rear (black ops)
589992: RSD Diesel wheel 3.5X17 front (black ops)
981988: V&H competition series slip-on black ceramic plated stainless steel